Hello, I need to install a video card because I get a no signal input and done tryed to see if it was just the monitor, I want to know how, is it really hard, and will any computer use any video card? Thank alot! =)|||Open the case and remove the old card, you may need a philips screwdriver to remove the retaining screw on card to backplane (one screw). Visit a local computer store, or retailer (best buy, etc) and show them the card. Tell them you need a replacement, they can look at the old card and tell if it's an AGP, PCI (x16), etc and get you a replacement. Inserting the new card is the same as removing the old, it's very easy.
You can spend upwards of $500 for a new video card, but if you just want a replacement I would suggest not spending more then $50. Some computer parts stores may even have lower cost OEM cards available, check your yellow pages.|||its not hard, but you can mess things up if your not careful. not all cards work in all computers. i suggest that you get a computer savy friend to help you out.|||Depending on the computer, it is usually easy.
I suggest getting a nVIDIA sound card, and I don't think any sound card will work with just any computer (but I'm not positive).|||You can do it right by following this:
http://www.directron.com/howtovideo.html|||u can install any video card that you know that works!!
i reccoemnd you to use the AGP slot, rather then the PCI slot, the AGP is more new-er!!
No comments:
Post a Comment